Description
Rectangular Water Tank 250lt Black (Loft) (Petrol-Oil)
Rectangular water tank 250lt (Loft)
ROTOGRAN plastic tanks are produced by the method of rotational molding. They are made of 100% recyclable linear medium density polyethylene (LMDPE) with antioxidants. Plastic tanks are not affected by solar radiation thanks to UV protection stabilizers.
ROTOGRAN plastic tanks are suitable for storing liquid fuels such as oil, some chemical liquids, as well as for storing water and food.
They have high resistance to temperatures from -25 degrees to +65 degrees Celsius and are easy to transport thanks to their light weight and appropriate handles. A wide variety of colors, shapes and sizes are available so that depending on your space, the ideal tank can be installed.
You can choose between a classic, rectangular or cylindrical tank, horizontal or vertical with the capacity that suits your needs. The extraction spout is 1/2″ or 1″. Before installation and use carefully read the installation-use instructions to avoid any error.
Features of rectangular tank 250 liters
- Method of production: ROTATIONALLY MOLDED.
- Medium density linear polyethylene (LMDPE).
- Protection against ultraviolet radiation (UV PROTECTION).
- Suitable for storage of oil, water, food, chemicals, etc.
- Resistance to temperatures from -25 to +65 degrees Celsius.
- Easy to carry thanks to their light weight and handles.
- Variety in shapes and sizes.
- Available in various colors: white, black, green, blue, etc.
Dimensions (all units are in millimeters)
| Lt | Height | Amplitude | Length | Cap diameter |
| 250 | 500 | 600 | 1100 | 200 |
Tank Weight: 13Kg
Tank Installation and Use
- Place the tank on a sturdy, flat floor and with all the points of its base stepping on it. No part of the base, even a small one, should be off the floor. Make sure that the point where the tank will be placed is clean and remove if there are any, stones, nails or other sharp small items that could <<pleging>> or causing damage to the tank.
- Unscrew the plastic cap and connect your supply while holding <<contras>> to the rackor nut. The exhaust udder should not be rotated at all. The connection of the supply and the watertightness test is the sole RESPONSIBILITY OF THE INSTALLER.
- The connection points should not receive stresses and vibrations.
- The BLACK tank is suitable for installation outdoors because it is protected itself and its contents from solar radiation. On the contrary, the WHITE tank is suitable for indoor placement.
- The placement of the tank underground, inside the ground is NOT INDICATED, unless some conditions are met, but in this case contact your supplier.
- It is allowed to store some chemicals, and it is suggested to contact the supplier to confirm them.
- Do not place various heavy or non-heavy objects, on or on the side of the tank.
- Avoid pressures on the tank.
- Neither side of the tank, SHOULD REST on any obstacle. LEAVE A DISTANCE AROUND THE TANK.
- In case of network connection, it is necessary to apply anti-vibration (rubber) connectors and a relief valve where required.
- In case of receiving content with a pump, make sure that its ventilation works.
- MONITOR the filling of the tank from the very beginning so that in case of leakage you stop the process.
- Titration is only indicative.
- The racors are 1 ́ ́, except for the loft tank which is 1/2 ́ ́ ́.
- The company bears no responsibility for third party components.
