Description
Battery Charger Victron Skylla-TG 48/50 (1+1) 48V 50A
Controlled by a microprocessor
1 full-capability output and 1 4A output. Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. The charger’s input voltage is 230Vac at 50/60Hz. To counter the voltage drop caused by the wiring’s resistance, the charging voltage can be measured directly on the batteries’ terminals. An external sensor alerts the system to decrease the charging voltage whenever the batteries’ temperature rises.
Input voltage (V AC) | 230 |
Input voltage range (V AC) | 185-264 |
Input voltage range (V DC) | 180-400 |
Frequency (Hz) | 45-65 |
Power factor | 1 |
Charge voltage ‘absorption’ (V DC) | 57 |
Charge voltage ‘float’ (V DC) | 53 |
Charge current house batt. (A) (2) | 50 |
Charge current starter batt. (A) | n. a. |
Charge characteristic | IUoUo (three step) |
Battery capacity (Ah) | 250-500 |
Temperature sensor | √ |
Can be used as power supply | √ |
Remote alarm | Potential free contacts 60V / 1A (1x NO and 1x NC) |
Forced cooling | √ |
Protection | Output short circuit, Battery reverse polarity detection, Battery voltage too high, Temperature too high |
Operating temp. range | -20 to 60°C (0 – 140°F) |
Humidity (non condensing) | max 95% |
5-Year Warranty
Made in the Netherlands