Description
Remote Control System via Mobile GSM D – GSM AD
GSM D and GSM AD are universal remote control and paging devices with unlimited range. You can use them wherever there is coverage from the mobile network. The two devices work together communicate with each other and turn on or off any device (e.g. pump) when instructed by a contact (e.g. float tank).
For each GSM device, the connection and mobile number are required. The network is chosen to be one that provides the strongest signal at the point where the device is installed.
The system can work either with a permanent connection or the card, depending on the needs of the application and the preferences of the customer. The connection to the card gives us the possibility of use from 12 months, at a very small cost, because communication is unanswered calls. It is charged only some error messages that you choose to take our mobile. Every time you have the card renewal you should not lose number and network connection. This process is very simple thanks to its ability to have AD GSM and GSM D, to allow users to ask for the balance of the time renewal card and make a renewal of such an SMS messaging system.
For the AD GSM network to work requires 230V and the AC POWER UNIT T200. This starts and stops the pump in the pump according to the state that is the contact of the flotation tank. The contact relay output is 12A/230V.
The AD GSM checks the power and sends a message if you want to stop and reset voltage. If the network is three-phase and you want to find out all three phases, then the inputs to the system should be made through the monitor voltage. There is also the possibility to send us a message and damage the pump.
You can enable GSM AD from your mobile, regardless of the condition of the float. To do this we must have passed the users’ phones to devices. These messages are directed to either the first or last user to handle. GSM D has the ability to float through three controls the low level in the tank, the high level and the filling or emptying of the tank. For high or low it notifies us with an SMS message on our mobile.
When the tank voltage is 230V, a power supply is required General LD. When there is no voltage it is 230 V, do not use the N.W., but solar and battery. GSM D contains the required charge control.
GSM D checks in any case the power and let us know about low battery or stop and reset voltage with analog SMS.
